10
2.4 General safety instructions
Please read the following safety instructions carefully to prevent injury and damage. Only in this way can
long-term safe operation of the SENEC.Home Li be guaranteed. The safety instructions must be observed
in full for any work on the SENEC.Home Li.
•
Immersion in liquid:
Never immerse the battery modules in water, spirits or other liquids. This can cause
overheating, smoke, explosion or fire.
•
High temperatures:
Do not use the battery modules next to a naked flame or a radiator. Do not expose
them to temperatures above 80 °C. Exposing the battery modules to high temperatures can trigger an internal
short circuit which can cause heat, smoke or an explosion or can cause a fire.
Danger to life from electric shock!
The capacitors carry a lethal voltage internally and at the terminals of the
PV
generator.
ä
Wait at least five minutes before you open the system.
ä
Use PPE.
Danger to life from electric shock!
Exposed electrical components inside the case.
ä
Do not touch any exposed electronic components.
ä
Do not remove any protective covers.
ä
Never reach beneath covers.
Danger to life from electric shock!
Take special care in electrical works on the SENEC.Home V2 Li and
on the electrical distribution box.
ä
Switch the SENEC.Home V2 Li off before working on the electrical system.
ä
Switch off the relevant electric circuits.
ä
Secure the SENEC.Home Li against being restarted.
ä
Check that it is isolated from the supply.
Danger to life from electric shock!
ä
Remove all metal items, e.g. personal jewellery from your hands,
wrists and neck before you start work.
Danger!
The following hazardous situations will certainly cause a serious injury
or death if they are not prevented.