35
2. Make sure that the toggle switch(es) of the module(s) to the electricity supply are set to the OFF position.
3. Fit the two mounting brackets on the left and right of the battery modules (the brackets and screws are supplied
with the battery modules.).
Figure 12 Fitting the mounting brackets to the battery modules
4. Insert the storage module(s) carefully and gently into the storage case to stand on the base. Ensure that the battery
module(s) are correctly seated.
Risk of injury from electric shock!
The battery modules must always be switched off when being
connected to the DC connection.
SENEC.Home Li 2.5 - Fit module 1 at the position illustrated.
SENEC.Home Li 5.0 - Fit modules 1 and 2 at the positions il-
lustrated.
SENEC.Home Li 7.5 - Fit modules 1, 2 and 3 at the positions
illustrated.
SENEC.Home Li 10.0 - Fit modules 1, 2, 3 and 4 at the posi-
tions illustrated.
4
3
2
1
POWER
0
I
OFF - ON
S <-> M
LO
W
UP
CO
M
ST
ATUS
SOC
POWER
0
I
OFF - ON
S <-> M
LO
W
UP
CO
M
ST
ATUS
SOC
POWER
0
I
OFF - ON
S <-> M
LO
W
UP
CO
M
ST
ATUS
SOC
POWER
0
I
OFF - ON
S <-> M
LO
W
UP
CO
M
ST
ATUS
SOC
1
2
3
4
Figure 13 Positions of the battery modules in the SENEC.Home Li storage unit and fastening to the retaining rails (blue arrow)
