73
14 Maintenance/servicing
You will find maintenance instructions in the maintenance manual on
www.senec-ies.com
. The following must
be checked during inspection/servicing of the SENEC.Home Li:
•
charge status of the battery cells
•
test in accordance with VDE-AR-E 2510-2:2015 and DIN VDE 0100-600 and DIN VDE 0105-100
•
cleanliness and leak tightness
•
firm seat of all connections
14.1 Servicing the battery modules
Reason for service
Countermeasure
Temperature
•
continuous temperature monitoring of the cells by the BMS
•
emergency shutdown if temperature too high or too low
Deep discharge
•
continuous monitoring of the cells by the BMS
•
emergency shutdown if voltage too low
Overcharging
•
continuous monitoring of the cells by the BMS
•
emergency shutdown if voltage too high or charge current too high
14.2 Software update
If the SENEC.Home Li is not permanently connected to the Internet, a software update is required at every
service. You must run a software update at least once a year.
You will have to bring the software update with you on an SD card and upload it if devices do not have an
Internet connection. Proceed as follows:
1. Download the latest software version from
www.senec-ies.com
.
2. Open the zip file and unpack the contents onto your laptop.
You now have the choice of FTP update or update from
SD card. In the relevant folder, you will find the zip file with the current software, and instructions which you can read
with a PDF reader.
3. Run the software update as described in the instructions.
The corresponding readme file lists the modifications and
improvements made in each update.
•
To update from the SD card, you must first completely switch off the SENEC.Home Li again.
•
The FTP update can run while the system is in operation. The SENEC.Home Li will have to be connected to the
Internet for this.
