Preparing for Printing
37
Changing the Port Settings for SmartDeviceMonitor for Client
Follow the procedure below to change the SmartDeviceMonitor for Client set-
tings, such as TCP/IP timeout, recovery/parallel printing, and printer groups.
❒
There are no settings for NetBEUI protocol.
Windows 95/98:
A
Open [
Printers
] window from [
Start
] menu.
B
In the [
Printers
] window, click the icon of the printer you want to use. On
the [
File
] menu, click [
Properties
].
C
Click the [
Details
] tab, and then click [
Configure Port
].
The
[
Port Settings
]
dialog box appears.
Windows 2000 / Windows NT 4.0:
A
Open [
Printers
] window from [
Start
] menu.
B
In the [
Printers
] window, click the icon of the printer you want to use. On
the [
File
] menu, click [
Properties
].
C
On the [
Ports
] tab, click [
Configure Port
].
The
[
Port Settings
]
dialog box appears.
Windows XP, Windows Server 2003:
A
On the [
Start
] menu, point to [
Settings
], and then click [
Printers
].
B
In the [
Printers
] window, click the icon of the printer you want to use. On
the [
File
] menu, click [
Properties
].
C
Click the [
Details
] tab, and then click [
Configure Port
].
The
[
Port Settings
]
dialog box appears.
• For TCP/IP, timeout setting can be configured.
❒
If no settings on the
[
Recovery/Parallel Printing
]
tab are available, follow
the procedure below.
A
Click
[
Cancel
]
to close the
[
Port Configuration:
]
dialog box.
B
Start SmartDeviceMonitor for Client, and then right-click the Smart-
DeviceMonitor for Client icon on the taskbar.
