Savin MLP28 Operating Instructions Manual Download Page 150

Page: 150 / 299

Making Printer Settings Using the Control Panel

150

• 100Mbps Half D.

• 100Mbps Full D.

❒

Default: Auto Select

❖

LAN Type

You can select Ethernet or IEEE 802.11b for LAN Type.
This menu appears only when the optional 802.11 interface unit is in-
stalled.

• Ethernet

• IEEE 802.11b

❒

Default: Ethernet

❖

IEEE 1394 Setup

You can make settings for IEEE 1394. This menu appears only when the op-
tional IEEE 1394 board is installed.

For details about IEEE 1394 Setup, see

Setup Guide

❖

DHCP

You can select

[

]

[

Off

]

to use TCP/IP with DHCP.

• On

• Off

❒

Default: On

❖

IP Address1394

You can specify the IP address for IEEE 1394 (IP over 1394).

❒

Default: 0.0.0.0

❒

When using both Ethernet and IP over 1394 simultaneously, do not
specify the IP address used for Ethernet.

❖

Subnet Mask1394

You can specify the subnet mask for IEEE 1394 (IP over 1394).

❒

Default: 0.0.0.0

❒

When using both Ethernet and IP over 1394 simultaneously, do not
specify the subnet mask used for Ethernet.

Summary of Contents for MLP28












































































































































































































































































































Search results

Summary of Contents for MLP28

Reviews:

Related manuals for MLP28

Brands by name

Popular brands

Savin MLP28, Operating Instructions Manual

Search results

Summary of Contents for MLP28

Reviews:

Related manuals for MLP28

Brands by name

Popular brands