Savin MLP28 Operating Instructions Manual Download Page 296 | Manualshive

Page: 296 / 299

background image

Appendix

296

Information about Installed Applications

expat

Use of the software installed on this product, including the controller (hereinafter
“software”) and the expat Version 1.95.2 application software (hereinafter “expat
1.95.2”), is subject to the following conditions:

The product manufacturer provides warranty and support to the software of the
product including expat 1.95.2 and the product manufacturer allows the initial de-
veloper of expat 1.95.2 to be free from these obligations.

Copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd

and Clark Cooper

Permission is hereby granted, free of charge, to any person obtaining a copy of
this software and associated documentation files (the “Software”), to deal in the
Software without restriction, including without limitation the rights to use, copy,
modify, merge, publish, distribute, sublicense, and/or sell copies of the Software,
and to permit persons to whom the Software is furnished to do so, subject to the
following conditions:

The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WAR-
RANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PUR-
POSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHER-
WISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFT-
WARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

❒

Information on expat 1.95.2 is available at:

http://expat.sourceforge.net/

JPEG LIBRARY

• The software installed on this product is based in part on the work of the In-

dependent JPEG Group.

NetBSD

Copyright Notice of NetBSD

For all users to use this product:

«
...
294
295
296
297
298
...
»

Summary of Contents for MLP28












































































































































































































































































































Reviews:

No comments

Related manuals for MLP28

Color imageCLASS MF8580Cdw

Brand: Canon Pages: 750

ImageCLASS 2300

Brand: Canon Pages: 8

Color imageCLASS MF8580Cdw

Brand: Canon Pages: 750

Color imageCLASS 8180c

Brand: Canon Pages: 95

Brand: Canon Pages: 4

Brand: Canon Pages: 49

ImageCLASS 2300

Brand: Canon Pages: 156

Brand: Canon Pages: 193

Brand: QMS Pages: 24

imageCLASS D1120

Brand: Canon Pages: 36

ImageCLASS 2300

Brand: Canon Pages: 44

Brand: Canon Pages: 66

iP2600 - PIXMA Color Inkjet Printer

Brand: Canon Pages: 2

Brand: Canon Pages: 8

ImageCLASS 2300

Brand: Canon Pages: 102

Brand: NCR Pages: 2

VariQuest Perfecta 2400STP

Brand: Varitronics Pages: 227

WorkCentre 7525

Brand: Xerox Pages: 70

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands