Preparing for Printing
33
Installing the PostScript 3 Printer Driver (Windows NT 4.0 -
TCP/IP)
❒
Installing this printer driver requires Administrators permission. Log on using
an account that has Administrators permission.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. If this hap-
pens, launch “Setup.exe” on the CD-ROM root directory.
C
Select an interface language, and then click [
OK
].
The default interface language is English.
❒
The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D
Click [
PostScript 3 Printer Driver
].
Add Printer Wizard starts.
E
Click [
Next
].
F
Click [
Add Port:
].
G
Click [
SmartDeviceMonitor
], and then click [
New Port...
].
H
Click [
TCP/IP
], and then click [
Search
].
A list of printers using
[
TCP/IP
]
appears.
I
Select the printer you want to use, and then click [
OK
].
Only printers that respond to a broadcast from the computer appear. To use
a printer not listed here, click
[
Specify address
]
, and then enter the IP address
or host name of the printer.
J
Check that the name of the printer whose driver you want to install is se-
lected, and then click [
Next >
].
K
Change the printer name if you want, and then click [
Next >
].
Select the
[
Yes
]
check box to configure the printer as default.
L
Specify whether or not to print a test page, and then click [
Finish
].
