Savch S3100E Series, User Manual

Page: 96 / 150

92
Setting
value
Function Description
39 Reserved Reserved
40 Current running time reached
When the inverter's current running time exceeds the time set in
09-53, it outputs an ON signal.
06-05
DFM terminal output mode selection

Factory setting 0
Setting range
0 Pulse output(DFM(P))
1 Switch output(DFM(M))
The DFM terminal is a programmable multiplex terminal, which can be used as a high-speed pulse output
terminal (DFM(P)) or an open collector switching output terminal (DFM(M)).
When DFM(P) is output as a pulse, please refer to 06-06 for DFM(P) related functions. The maximum frequency
of the output pulse is 100kHz.
When DFM(M) is output as a switch, please refer to 06-04 for DFM(M) related functions.
06-06 DFM(P) output function selection

Factory setting 0
06-07 AFM output function selection

Factory setting 0
06-08 Reserved

Factory setting
DFM (P) terminal output pulse frequency range is 0.01kHz ~ 06-09 (DFM (P) output maximum frequency), 06-09
can be set between 0.01kHz ~ 100.00kHz.
Analog output AFM output range is 0V ~ 10V. The relationship between the range of pulse output or analog output
and the scaling of corresponding functions is shown in the following table:
Setting value Funtion Pulse or analog output 0.0%~100.0% corresponding function
0 Running frequency 0 to max output frequency
1 Set frequency 0 to max output frequency
2 Output current 0 to 2 times of motor rated current
3 Output torque 0 to 2 times of motor rated torque
4 Output power 0 to 2 times rated power
5 Output voltage 0 to 1.2 times of inverter rated voltage
6 PULSE input 0.01kHz ～ 100.00kHz
7 AVI1 0V ～ 10V
8 AVI2/ACI 0V
～
10V(or 0
～
20mA)
9 Reserved
10 Length 0 to maximum set length
11 Count value 0 to maximum count value
12 Communication setting 0.0% ～ 100.0%
13 Motor rotation speed
0 ～ The rotation speed corresponding to maximum output
frequency
14 Output current 0.0A~1000.0A
15 BUS voltage 0.0V~1000.0V