Savch S3100E Series, User Manual

Page: 58 / 150

54
11 Fault and protection parameters

indicates that the parameters can be set during operation
Parame
ter
Parameter function Setting range
Factory
setting
11-23
Power-on time at the third
(latest)
fault
－ －
11-24
Running time at the third (latest)
failure
－ －
11-27
Frequency at second failure
－ －
11-28
Current at second fault
－ －
11-29
Bus voltage at the second fault
－ －
11-30
Input terminal status at the second
fault
－ －
11-31
Output terminal status at the
second fault
－ －
11-32
Inverter status at the second fault － －
11-33
Power-on time at the second fault
－ －
11-34
Running time on second failure
－ －
11-37
Frequency at first failure
－ －
11-38
Current at first fault
－ －
11-39
Bus voltage at first fault － －
11-40
Input terminal status at the first
fault
－ －
11-41
Output terminal status at the first
fault
－ －
11-42
Inverter status at first fault
－ －
11-43
Power-on time at first failure
－ －
11-44
Operating time at first failure － －
11-47
Fault protection action selection1
Single digit:Motor overload
0:Coast to stop
1:Stop according to the stop mode
2:Continue to run
Tens digital:input phase loss(Same bit)
hundreds digital:output phase loss(Same bit)
thousands digital:External fault(Same bit)
ten thousands digital:Communication
error(Same bit)
0

11-48
Fault protection action selection 2
Single digit:Reserved
Tens digital:EEPROM read write fault
0:Coast to stop
1:Stop according to the stop mode
hundreds digital:Reserved
thousands digital:Reserved
ten thousands digital:Operating time
arrival(same as 11-47 digits)
0
