27
3.2 Description of Keyboard Operation
3.2.1 Parameter setting
Here are three levels of menu:
1.Function code number group (first)
2.Function code labeling (second)
3.Function code value setting(third)
Note:Press PRG / ESC or DATA / ENT to back to second-level menu when in the third-level. The difference
between them is:DATA / ENT key stores the set parameter into control board before backing to
second-level menu and shifts to the next function code automatically. While PRG / ESC key backs to the
second-level menu directly without storing parameters and keeps the current function code.
For example, set the frequency of function code 07-01 from 00.00Hz to 01.05Hz.
In the state of third-level menu, the function code can’t be modified if the indicator does not flicker, the reason
of would be:
1)The parameter s of function code can not be modified, e.g. actual detection parameters, operation record
parameters, etc.
2)The parameter s of function code can not be modified in running state, the code could be modified only
when the motor stops.
Summary of Contents for S3100E Series
Page 1: ...S3100Eseries inverter General vector control PM User manual User manual ...
Page 24: ...20 Size 5 Unit mm S3100E 4T45G 55P 4T110G Size 6 Unit mm S3100E 4T110G 132P 4T160G 185P ...
Page 25: ...21 Size 7 Unit mm S3100E 4T185G 200P 4T220G Size 8 Unit mm S3100E 4T220G 250P 4T315G ...
Page 26: ...22 Size 9 Unit mm S3100E 4T315G 355P 4T400G 450P Size 10 Unit mm S3100E 4T450G 500P 4T500G ...
