SINUS PENTA
GUIDE TO THE
REGENERATIVE APPLICATION
84/
150
4. SOFTWARE
DOWNLOAD
FOR
APPLICATION
PROGRAMMING
The Remote Drive software and the PXxxxxF0.mot, PXxxxxF1.mot files of the application are required to
download the application to a Sinus Penta drive. The download procedure is detailed in the following section.
The PRxxxxF0.mot and PRxxxxF1.mot files are required for the regenerative application.
NOTE
Please refer to the Remote Drive / Iris Control DRIVE REMOTE CONTROL - User
Manual for more details.
The software of the Sinus Penta drives consists of two files, one containing the firmware and one containing
the MMI table for the keypad interface. Both files use hexadecimal files with the MOT format. The filenames
ending with “F0” relate to the firmware; the filenames ending with “F1” (or F2/F3/F4) relate to the MMI table.
CAUTION
The first three digits of the file name PR
xxx
xF0.mot and PR
xxx
xF1.mot
must always be the same
(for example, PR
412
xF0.mot and
PR
412
xF1.mot). They must also match the first three digits of the firmware
version installed in the initial drive.
For example: Texas Software Version
4.12
2, MMI Software Version
4.12
3
