Samsung DCS-816, Programming Manual

Page: 272 / 313

SAMSUNG Installation
DCS-816 February, 1999
6-4
6.4 Door Phone and Door Lock Release (Figure 6-3)
The DCS DPIM module is required to install a door phone or a door lock release. The DPIM has a
door phone interface and a door lock release circuit, which can be connected to any DLI port of
DCS-816. The system requires MDF connection for DPIM modules and modular jack connection
for a door phone or a door lock release. DPIM connections can be done through the champ
connector on the base board. See Figure 2-3 and refer to section 2.5 (MDF Cabling).
Use one pair twisted wires, connect each DPIM module to the DLI port of your choice via the
champ connector on the base board and connect a door phone or a door lock release to the
DPIM.
CONNECTING A DOOR PHONE AND LOCK RELEASE
25 PAIR CABLE WITH FEMALE CONNECTOR TO THE BASE CHAMP CONNECTOR
FIGURE 6-3
CHAMP CONNECTION
PIN COLOUR CIRCUITS/ FUNCTIONS
39/14 BK-BR/ BR/BK T/R, 1
st
DLI port on base
40/15 BK-S/ S-BK T/R, 2
nd
DLI port on base
41/16 Y-BL/ BL-Y T/R, 3
rd
DLI port on base
42/17 Y-O/ O-Y T/R, 4
th
DLI port on base
43/18 Y-GR/ GR-Y T/R, 5
th
DLI port on base
44/19 Y-BR/ BR-Y T/R, 6
th
DLI port on base
45/20 Y-S/ S-Y T/R, 7
th
DLI port on base
46/21 VL-BL/BL-VL T/R, 8
th
DLI port on base
47/22 VL-O/ O-VL T/R, 9
th
DLI port on base
48/23 VL-GR/ GR-VL T/R, 10
th
DLI port on base
49/24 VL-BR/ BR-VL T/R, 11
th
DLI port on base
50/25 VL-S/ S-VL T/R, 12
th
DLI port on base
²
CONNECT A DPIM TO ANY DLI PORT AFTER
CONNECTING A DOOR-PHONE TO THE DPIM
²
ALL EQUIPMENT ABOVE IS NOT ALLOWED TO
INSTALL OUTDOORS
²
DOOR LOCK RELEASE RATE : 24VDC, 1A MAX
LOCK DOOR BOX LINE
£Ð£«
£Ð£-
£Ì£±
£Ì£²
DOOR PHONE
RED
BLACK
GREEN
YELLOW
TWO PAIR
MODU LAR CABLE
WHITE
BLUE
THREE PAIR
MODULAR CABLE
TO CUSTOMER-PROVIDED
DOOR LOCK RELEASE
+ 24VDC
- 1AMP MAX
4
5
2
3
1 6