Samsung DCS-816, Programming Manual

Page: 291 / 313

SAMSUNG System Administration and Special Features Guide
DCS-816 February, 1999
1 - 1
PART 1. SPECIAL FEATURES
1.1 NIGHT SERVICE OPERATION
(AUTOMATIC OR MANUAL)
Your system is designed to have an alternative mode of operation generally designated as
Night Service. Night Service permits incoming calls to ring differently to those during
normal day operation. Night Service is available on an individual system basis and may be
set manually or automatically. While in the NIGHT mode, stations will be limited to their
individual night class of service dialling restrictions. You can put the system in or out of
Night Service at any time. For automatic Night Service, the system has an on-time and an
off-time for each day. If no automatic timer is set, Night Service must be turned on and off
manually.
1.2 AUTOMATIC NIGHT SERVICE
Automatic Night Service is turned on or off according to the programmed on and off times.
These programmed times use the system clock as a reference, so the system clock must
be set correctly. Pressing the manual
NIGHT key will override the automatic mode until
the next programmed time.
1.3 MANUAL NIGHT SERVICE
Press the NIGHT key on any keyset to enter Night Service. Enter the Night Service
passcode and press 1 to enter Night Service or 0 to leave Night Service. The NIGHT key
on all keysets will light red to indicate that Night Service has been set.
1.4 CALLING THE SYSTEM OPERATOR
Any station that dials 0 will ring its assigned operator. Calls to the system operator are
easily identified because the CALL key will have a rapidly flashing red light. Station users
will never receive a busy signal when they dial 0 or the operator group number. The calls
will continue ringing in queue until answered.
1.5 OPERATOR RECALLS
Transferred calls that go unanswered will recall to the station that originated the transfer.
Should the station that originated the transfer not answer the recall, the call will be sent to
the system operator as a transfer recall.
A call left on hold will recall the station that put it on hold. If the hold recall is unanswered
at the station that originated the hold, the call will be sent to the system operator.
Both types of recalls will ring and have a slow flashing amber light on the
LINE key or
CALL key.