Samsung DCS-816, Programming Manual, Page: 50 / 313

SAMSUNG Programming
DCS-816 February, 1999
MMC 116 (Page 1 of 2)
MMC: 116
ALARM AND MESSAGE
DESCRIPTION:
Allows the system administrator or technician to set or change the alarm
clock/appointment reminder feature for any station. This must be done for
single line telephone because they cannot access programming. Two alarms
may be set for each station and each alarm may be defined as a one–time or
TODAY alarm or as a DAILY alarm. The TODAY alarm is automatically
cancelled after it rings, while the DAILY alarm rings every day at the same
time. It is also possible to set a message to display when the alarm is sounded.
0 NOTSET
1 TODAY
2 DAILY
Messages are written using the keypad. Each press of a key will select a
character. Pressing the dial pad key will move the cursor to the next position.
For example, if the directory name is “SAM SMITH,” press the number “7” four
times to get the letter “S.” Now press the number “2” once to get the letter “A.”
Continue selecting characters from the table below to complete your message.
Pressing the “A” key will change the letter from upper case to lower case.
COUNT 1 2 3 4 5
DIAL 0 < > . ) 0
DIAL 1 Space ? , ! 1
DIAL 2 A B C @ 2
DIAL 3 D E F # 3
DIAL 4 G H I $ 4
DIAL 5 J K L % 5
DIAL 6 M N O ^ 6
DIAL 7 P Q R S 7
DIAL 8 T U V
Q
8
DIAL 9 W X Y Z 9
DIAL
Q
: = [ ]
Q
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
A Key 19, acts as toggle between upper case and lower case