Samsung DCS-816 Programming Manual Download Page 18

Page: 18 / 313

SAMSUNG

Programming

DCS-816

February, 1999

2-12

CALLING LINE INDICATION PRESENTATION

(CLIP)

Hardware Provisions

ISDN trunk cards

Software Provisions

The MMCs related to CLIP are listed below with a short description of their use. They

are listed in the recommended order in which they should be programmed. This

sequence is suggested so that the installer gets a better understanding of how the

feature works. There is no technical reason to follow this sequence.

MMC 312 ALLOW CLIP

This MMC is used by the technician to

determine which keysets are allowed to

receive CLIP displays.

MMCs 722 and 723

These MMCs have had new keys related

to CLIP features added to them. It is

strongly recommended that all keysets

allowed CLIP in MMC 312 are

programmed with a CLIP key.

MMC 728 CLIP TRANSLATION

This MMC allows the technician to create

a list of names that correspond to

numbers received from the Central Office

(C.O.). These names will be displayed

when a call rings in that has NUMBER

ONLY data provided by the C.O.

MMC 725 SMDR OPTIONS

The ability to print CLIP data and

abandoned calls has been added to this

MMC.

MMC 119 CLIP DISPLAY

This MMC is used by the end user to

determine which piece of CLIP data is

Summary of Contents for DCS-816


























































































































































































































































































































Search results

Summary of Contents for DCS-816

Reviews:

Related manuals for DCS-816

Brands by name

Popular brands

Samsung DCS-816, Programming Manual

Search results

Summary of Contents for DCS-816

Reviews:

Related manuals for DCS-816

Brands by name

Popular brands