Samsung DCS-816, Programming Manual

Page: 206 / 313

SAMSUNG Programming
DCS-816 February, 1999
MMC 726 (Page 1 of 4)
MMC: 726
VM/AA OPTIONS
DESCRIPTION:
Provides a flexible means of setting in–band signalling for voice mail or auto
attendant parameters. There are eight main options for programming and
several sub–options to customise the application. Simple YES/NO, numeric
and alpha characters are required for setting VM/AA.
The following options may be selected for VM/AA operation:
0. EXT FOR DN1 DTMF information for the station that called the
VM/AA port station that is forwarded to VM/AA
port.
1. TRK FOR DN1 DTMF information for the trunk that called the
VM/AA port.
2. EXT FOR DN2 DTMF information for the station that originated
the call to a station that is forwarded to a VM/AA
port.
3. TRK FOR DN2 DTMF information for the trunk that called a
station forwarded to a VM/AA port.
4. SEPARATOR In cases where DN2 is used, this specific digit is
sent between the DN1 and the DN2 information.
Both DN1 and DN2 must be set to YES for
SEPARATOR to be sent.
5. DISCONNECT SIGNAL This signal is sent when the calling station or C.O.
line hangs up.
6. CALL TYPE ID Under this VM/AA option are several customising
applications:
0 . DIRECT CALL A call originating directly from another station in
the system.
1 . ALL FWD CALL This indicates that a call was forwarded to the
VM/AA port from a station with CALL FORWARD
ALL set.
2 . BSY FWD CALL This indicates that a call was forwarded to the
VM/AA port from a station with CALL FORWARD
BUSY set.
3 . NOA FWD CALL This indicates that a call was forwarded to the
VM/AA port from a station with CALL FORWARD
NO ANSWER set.