manualshive.com logo in svg

Samsung DCS-816, Programming Manual, Page: 275 / 313

Share
Download
Samsung DCS-816 Programming Manual Download Page 275

SAMSUNG  

                                                                      Installation

DCS-816

                                                              February,  1999

7-1

PART 7. CONNECTING OPTIONAL EQUIPMENT

7.1 Music-on-Hold/ Background Music (Figure 7-1)

The DCS-816 system provides one music channel which is from the built-in melody chip (internal)
or an external music source (CD player, radio etc).  Section 2.7 describes how to select the
source.  For the external music interface, the system requires MDF connection and the connection
can be made through the champ connector.  See Figure 2-3 and refer to section 2.5 (MDF
Cabling).

Use one pair twisted wires and connect a CD player or radio to the external music interface via the
champ connector on the base board.

CONNECTING EXTERNAL MUSIC

25 PAIR CABLE WITH FEMALE CONNECTOR TO THE BASE CHAMP CONNECTOR

FIGURE 7-1

CHAMP CONNECTION

PIN COLOUR

CIRCUITS/ FUNCTIONS

²

 

CONNECT AN EXTERNAL MUSIC SOURCE  TO
THE INTERFACE VIA MDF AND AN AUDIO
CABLE

²

 

NO POLARITY

38/13BK-O/ O-BK

T/R, External Music Interface

Summary of Contents for DCS-816


























































































































































































































































































































Reviews:

No comments