Samsung DCS-816, Programming Manual

Page: 148 / 313

SAMSUNG Programming
DCS-816 February, 1999
MMC 602 (Page 1 of 2)
MMC: 602
STATION GROUP NAME
DESCRIPTION:
Allows the system administrator or technician to enter an 11–character name to
identify an individual station group.
Names are written using the keypad. Each press of a key selects a character.
Pressing the next key moves the cursor to the next position. For example, if the
directory name is “SAMSUNG," press the number “7” four times to get the letter
“S.” Now press the number “2” once to get the letter “A.” Continue selecting
characters from the table below to complete your message. Pressing the bottom
left programmable key changes the letter from upper case to lower case.
NOTE
When the character that you want appears on the same dial pad key as the previous character,
press the UP key to move the cursor to the right or the DOWN key to move cursor left. A space
can be entered by using these keys.
COUNT 1 2 3 4 5 6
DIAL 0 < > . ) 0
DIAL 1 Space ? , ! 1
DIAL 2 A B C @ 2
DIAL 3 D E F # 3
DIAL 4 G H I $ 4
DIAL 5 J K L % 5
DIAL 6 M N O ^ 6
DIAL 7 P Q R S 7
DIAL 8 T U V
Q
8
DIAL 9 W X Y Z 9
DIAL
Q
: = [ ]
Q
The # key can be used for special characters: #, space, &, !, :, ?, ., %, $, –,
<
,
>
, /,
=, [, ], @, ^, (, ), _, +, {, }, |, ;, \, " and
~.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry