Samsung DCS-816, Programming Manual

Page: 310 / 313

SAMSUNG System Administration and Special Features Guide
DCS-816 February, 1999
3 - 15
3.16 ADDING NAMES TO THE TRANSLATION TABLE
This program allows the system administrator or technician to associate a CLIP number
received from the central office with a name programmed in this translation table. If there
is no match between a received number and a name in this table, [no CLIP name] will be
displayed.
The translation table consists of 200 entries, each comprising a 10-digit telephone number
and a 16-digit name.
Names are written using the keypad. Each press of a key selects a character. Pressing
the dial pad key moves the cursor to the next position. For example: if the directory name
is "SAM SMITH," press the number "7" four times to get the letter "S". Now press the
number "2" once to get the letter "A". Continue selecting characters from the table below
to complete your message. Pressing the "A" key changes the letter from upper case to
lower case.
NOTE: When the character you want appears on the same dial pad key as the previous
character, press the VOL UP key to move the cursor to the right.
COUNT
>
1 2 3 4 5
DIAL 0 < > . ) 0
DIAL 1 space ? , ! 1
DIAL 2 A B C @ 2
DIAL 3 D E F # 3
DIAL 4 G H I $ 4
DIAL 5 J K L % 5
DIAL 6 M N O ^ 6
DIAL 7 P Q R S 7
DIAL 8 T U V
Q
8
DIAL 9 W X Y Z 9
DIAL
Q
: = [ ]
Q
The # key can be used for the following special characters: #, space, &, !, :, ?, ., %, $, -, /,
=, [, ], @, ^, (, ), _, +, {, }, |, ;, \, " and ~.
PROGRAM KEYS
UP & DOWN Used to scroll through options.
KEYPAD Used to enter selections.
SOFT KEYS Move cursor left and right.
SPK Used to store data and advance to next program.
HOLD Used to clear previous entry.
Open customer programming and follow the instructions below.
OPERATION
1. Press TRSF 728
CLIP XLAT (001)
DIGIT :