SAMSUNG
Programming
DCS-816
February, 1999
MMC 501 (Page 4 of 7)
CALLBACK NO ANS:
This timer controls the time before the callback is
automatically cancelled when a callback detects Ring No
Answer.
CAMP ON RECALL:
This timer controls the duration of time a camped–on call
will stay at a destination before recalling to the
transferring station.
CLIP DISPLAY TIME:
The amount of time that the Calling Line ID information
remains on the keyset’s display. While on a trunk
conversation, users are allowed to review received CLIP
by pressing
SCROLL
à
CLIP
soft key, but LCD will
automatically go back to trunk conversation status on
expiration of this timer.
CLIP MSG RECEIVE:
The amount of time that the system will allow a valid
message from the C.O.
C.O. CLEAR TIME
:
The length of time a DTS key remains busy after
cleardown.
CO CONFIRM TIME:
After this time, the outgoing call is disconnected or you
can hear the confirm tone.
C.O.–C.O.
This timer monitors the duration of an unsupervised co-
DISCONNECT:
nference; when it expires, both trunks are disconnected.
CONFER TONE INT
: This timer controls the timing of intervals between the
tones heard by the parties in a conference.
CONFIRM TONE
The tone heard when a feature is activated or deactiva-
TIME
ted.
DIAL PASS TIME:
This timer is the wait time for preventing the misdialling of
an outgoing call. After the last digit has been dialled, the
voice path is connected.
DISA DISCONNECT:
This timer controls the maximum duration of a DISA call.
DISA LOCK OUT TM:
This timer controls the duration of time a DISA call is not
allowed to be made after the DISA error counter has
expired (MMC 500).
DISA NOANS DISC.:
This timer controls the duration of time a DISA call is
disconnected by force when called party is not answered.
DISA PASS CHECK:
This timer defines the time period before the system
clears the incorrect passcode counter.
DISPLAY DELAY TM:
This timer controls the duration a display is shown in the
LCD display. This timer also controls the duration of time
that error tone is heard.
Summary of Contents for DCS-816
