Samsung DCS-816, Programming Manual

Page: 202 / 313

SAMSUNG Programming
DCS-816 February, 1999
MMC 725 (Page 1 of 4)
MMC: 725
SMDR OPTIONS
DESCRIPTION:
Allows the system administrator to select the information printed on the
SMDR report. The following options may be selected to print on SMDR:
0.PAGE HEADER Determines whether a page header prints at the
top of each page. This would normally be turned
off if SMDR is being sent to a call accounting
machine.
1.LINE PER PAGE Selects the length of each page to determine
when to print the SMDR header. The number of
lines is in the range 01–99.
2.INCOMING CALL Determines whether incoming calls print on
SMDR.
3.OUTGOING CALL Determines whether outgoing calls print on
SMDR.
4.AUTHORISE CODE Determines whether authorisation codes print on
SMDR.
5.SMDR START TIME Determines whether valid calls will include the
minimum call time in total call duration.
6.IN/OUT GROUP Allows a message, IN GROUP or OUT GROUP,
to be printed in the Digits Dialled column each
time a station enters or leaves a group.
7.DND CALL Allows a message, DND ON or DND OFF, to be
printed in the Digits Dialled column each time a
station enters or leaves DND.
8.WAKE–UP CALL Determines whether stations receiving an alarm
reminder call print on SMDR.
9.DIRECTORY NAME Allows the system administrator to enter a 16–
character name which will appear on the SMDR
header.
10. CALLER ID DATA Can be selected to print CLIP data received
from the C.O. on incoming ISDN calls. This
option requires the use of a 132–column printer
or an 80–column printer set for condensed print.
11. ABANDON CALL If this option is set to YES, unanswered calls will
print on SMDR.
13. NO. OF DIAL MASK Determines whether number of masked dial
digits print on SMDR.