manualshive.com logo in svg

Samsung DCS-816, Programming Manual, Page: 224 / 313

Share
Download
Samsung DCS-816 Programming Manual Download Page 224

SAMSUNG  

Programming

DCS-816

 February,  1999

                                MMC 800 (Page 2 of 2)

3.

Enter 1 to enable or 0 to disable
OR
Press UP or DOWN to select

If not assigned any data in MMC 812, you have
to select your Country Code

The system is restarted and all MMC data is
changed for selected country

ENABLE TECH.PROG
ENABLE

ENABLE TECH. PROG
SELECT COUNTRY

ENABLE TECH. PROG
NONE

ENABLE TECH. PROG
E.U.

4.

Press SPK to advance to MMC entry level

801:TEC.PASSCODE
SELECT PROG.ID

5.

Enter the MMC desired (e.g., 210)

210:TEN.ON & OFF
LCR ENABLE    :OFF

6.

To log out and return to MMC 800, press UP or
DOWN key to select DISABLE
OR
Press SPK then TRSF to return to normal
display
Programming option will time out

DEFAULT DATA:  DISABLE

RELATED ITEMS: None

Summary of Contents for DCS-816


























































































































































































































































































































Reviews:

No comments