Samsung DCS-816, Programming Manual, Page: 30 / 313

SAMSUNG Programming
DCS-816 February, 1999
MMC 105 (Page 1 of 2)
MMC: 105
STATION SPEED DIAL
DESCRIPTION:
Allows the system administrator or technician to program the personal speed dial
locations assigned to a station. This must be done for single line telephones
because these stations cannot access programming. Each station may have up
to 50 locations or bins assigned to it in MMC 606 Assign Speed Block. The speed
dial bins are numbered 00–49. Each speed dial number consists of a trunk or
trunk group access code followed by a separator and up to 24 digits to be dialled.
These dialled digits may consist of 0–9,
[
and #. If the system recognises a valid
trunk or trunk group access number, it will automatically insert the separator.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
B Used to insert a flash code “F”
C Used to insert a pause code “P”
D Used to insert a pulse/tone conversion code “C”
E Used to mask/unmask following digits (shows as “[” or “]” )
F Used to enter name for speed dial bin (see MMC 106)
ACTION DISPLAY
1. Press TRSF 105
Display shows
[201] SPEED DIAL
00 :
2. Dial station number (e.g. 205)
OR
[205] SPEED DIAL
00 :
Press UP or DOWN to select station and
press RIGHT soft key to move cursor
If selected station has no speed dial bins,
the display will be as shown and a new
[205] SPEED DIAL
SPDBLK NOT EXIST
station may be selected
3. Dial location number (e.g., 05)
OR [205] SPEED DIAL
05: _
Press UP or DOWN to select location and
press RIGHT soft key to move cursor
4. Enter trunk access code (e.g., 9) followed
by the number to be dialled (e.g., 4264100)
[205] SPEED DIAL
05 : 9–4264100_
OR
Press the RIGHT soft key to return to step 2
OR
Press the LEFT soft key to return to step 3
Press HOLD button to clear an entry
If an error is made, use DOWN arrow to
step back