manualshive.com logo in svg

Samsung DCS-816, Programming Manual, Page: 219 / 313

Share
Download
Samsung DCS-816 Programming Manual Download Page 219

SAMSUNG  

Programming

DCS-816

 February,  1999

                                MMC 734 (Page 1 of 1)

MMC: 734

             AA MESSAGE MATCH

DESCRIPTION:

This MMC allows up to five messages to be grouped together into a single
transmission with its own identification number.

For example, 

05+07+13+16+64

 = 

01

 (identification number).

ACTION

       DISPLAY

1.

Press TRSF 734
If an AA card is fitted the following display will
appear

AA MSG MATCH(01)
01

2.

Dial the desired MSG identification (link) number
(

01–64

)

OR
Press UP or DOWN to select and press RIGHT
soft key

AA MSG MATCH(01)
01

3.

Dial MSG numbers (01 – 64 ) recorded in AA
card (up to 5)
OR
Press UP or DOWN to select and press RIGHT
soft key

(MMC will automatically insert ‘+’ as a delimiter)

AA MSG MATCH(01)
05+07+13+16+64

4.

Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC

DEFAULT DATA: MSG index number

RELATED ITEMS: None

Summary of Contents for DCS-816


























































































































































































































































































































Reviews:

No comments