manualshive.com logo in svg

Samsung DCS-816, Programming Manual, Page: 87 / 313

Share
Download
Samsung DCS-816 Programming Manual Download Page 87

SAMSUNG  

Programming

DCS-816

 February,  1999

MMC 316 (Page 1 of 1)

MMC: 316     

COPY STATION USABLE

DESCRIPTION:

Copy the condition of station/trunk usability and station/station usability from one
station to another station.

PROGRAM KEYS

UP & DOWN

Used to scroll through options

KEYPAD

Used to enter selections

SOFT KEYS

Move cursor left and right

SPK

Used to store data and advance to next MMC

HOLD

Used to clear previous entry

ACTION

   DISPLAY

1.

Press TRSF 316
Display shows

[201] CPY USABLE
FROM:NONE

2.

Enter destination station number (e.g. 205)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to move cursor

[205] CPY USABLE
FROM:NONE

3.

Enter the source station number (e.g. 210)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to move cursor

[205] CPY USABLE
FROM:210

4.

Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC

DEFAULT DATA:  None

RELATED ITEMS:  MMC 304 Assign Station/Trunk Use

MMC 317 Assign Station/Station Use

Summary of Contents for DCS-816


























































































































































































































































































































Reviews:

No comments