Samsung DCS-816, Programming Manual

Page: 170 / 313

SAMSUNG Programming
DCS-816 February, 1999
MMC 706 (Page 1 of 2)
MMC: 706
SYSTEM SPEED DIAL BY NAME
DESCRIPTION:
Allows a name (up to 11 characters) to be entered for each system speed dial
location. This name enables the speed dial number to be located when using the
directory dial feature. The directory dial feature allows the display keyset user to
select a speed dial location by scanning its name.
Names are written using the keypad. Each press of a key selects a character.
Pressing a different key moves the cursor to the next position. For example, if the
directory name is “SAM SMITH," press the number “7” four times to get the letter “S.”
Now press the number “2” once to get the letter “A.” Continue selecting characters
from the table below to complete your message. Pressing the “A” key changes the
letter from upper case to lower case.
NOTE
When the character you want appears on the same dial pad key as the previous character, press the UP
key to move the cursor to the right.
COUNT 1 2 3 4 5
DIAL 0 < > . ) 0
DIAL 1 Space ? , ! 1
DIAL 2 A B C @ 2
DIAL 3 D E F # 3
DIAL 4 G H I $ 4
DIAL 5 J K L % 5
DIAL 6 M N O ^ 6
DIAL 7 P Q R S 7
DIAL 8 T U V
Q
8
DIAL 9 W X Y Z 9
DIAL
Q
: = [ ]
Q
The # key can be used for the following special characters: #, space, &, !, :, ?, ., %, $,
–, <, >, /, =, [, ], @, ^, (, ), _, +, {, }, |, ;, \, " and ~.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
TRSF Used to store and exit MMC