Samsung DCS-816, Programming Manual

Page: 304 / 313

SAMSUNG System Administration and Special Features Guide
DCS-816 February, 1999
3 - 9
4. Dial the location number (e.g., 05)
OR press
UP or DOWN to select location and press
[205] SPEED DIAL
05 : _
the right soft key to move the cursor
OR press the left soft key to return to step 2
5. Enter the trunk access code (e.g., 0) followed by
the number to be dialled (e.g., 4264100)
[205] SPEED DIAL
05 : 0-4264100_
OR press the right soft key to return to step 2
OR press the left soft key to return to step 3
OR press
HOLD to clear an entry (if you make an error,
use the DOWN key to step back)
6. Press the F key to access Program System Speed Dial
Numbers (above)
OR press TRSF to save and exit programming
OR press SPK to save and advance to the next program
DEFAULT DATA: NO SPEED DIAL NUMBERS PROGRAMMED
3.10 PROGRAM PERSONAL SPEED DIAL NAMES FOR OTHER
STATIONS
Each individual station user can program his/her own names, but in cases where this is
not practical, this program allows a system administrator to view or change any station's
speed dial names. The station speed dial codes are 00-49. Each station begins with 10
numbers (00-09) and can be assigned more in blocks of 10 up to a maximum of 50
numbers.
PROGRAM KEYS
UP & DOWN Used to scroll through options.
KEYPAD Used to enter selections.
SOFT KEYS Move cursor left and right.
SPK Used to store data and advance to next program.
HOLD Used to clear previous entry.
ANS/RLS Used to select ALL.
OPERATION
1. Press TRSF 106
[201] SPEED NAME
00 :
2.
Dial the station number (e.g., 205 )
OR press UP or DOWN to select the station and press
[205] SPEED NAME
00 :
the right soft key to move the cursor