Index revision : A
索引版本:A
48
7115
出磁铁,注意辨别磁铁的方向(镀银
/
黑色)。
• Raise the magnet in the right direction (
see § 10.9.1.1 page 35
) and lock the ring into the valve body by
pushing firmly with your finger.
调整正确的磁铁方向,举起磁铁(详见第
35
页
§ 10.9.1.1
),然后用手指推动垫圈,将其锁入空气阀中。
Once the gun has been completely reassembled, inspect the high-voltage activation and shut- down.
If the high-voltage is permanently activated or does not turn off: verify the magnet direction.
喷枪完全重装好后,检查高压开启和关闭功能。
如果高压模式无法关闭或无法开启,则确认磁铁方向是否装
反。
Summary of Contents for NANOGUN-MX
