Index revision : A
索引版本：A
16
7115
3.2 GNM 6080 control module
3.2 GNM 6080
控制模块
The
GNM 6080
control module serves to display the use parameters along with their settings.
GNM 6080
控制模块可用来显示使用参数以及喷枪的设置。
Front side of the GNM 6080 control module
GNM 6080
控制模块正面
1
Maintenance indicator light
指示灯维护
2
High voltage default indicator light
默认高压指示灯
3
Acknowledgement of defaults
确定默认参数
4
Display of the voltage set point
显示电压设置水平
5
Increase of the voltage set point
上调电压设置水平
6
Bar graph of current consumption
现阶段消耗量柱状图
7
Active, preset memory indicator lights
现用参数组
/
预设
参数组指示灯
8
Selection of the active memory
选择现用参数组
9
Voltage bar graph
电压柱状图
10
Decrease in the voltage set point
下调电压设置水平
11
Temperature default indicator light
默认温度指示灯
12
Generator default indicator light
默认静电发生器指示灯
13
Low-voltage cable default indicator light
默认低压电线
指示灯
Temperature default:
The temperature default forces the indicator lights (Rep.
11 and 12). Once the temperature drops below the minimum, the temperature
indicator light (Rep. 11) shuts off, and the operator has the option of deleting
the default by pressing the
“Default Acknowledgement” button (Rep. 3).
默认
温度：达到默认温度，指示灯亮起（
11
和
12
）。
11
和
311)
一旦温度低于默认
Summary of Contents for NANOGUN-MX
