84
•
Basic Operations
Sam4POS 6600/4800II Operators Manual v2.9
Manual Card Entry
Manual card entry is allowed on Credit, Gift and EBT transactions if the reader is unable to read the card
or for card not present sales.
Note: PIN Debit payments must be processed as card-present transactions, card data must be read by the
card reader and cannot be manually entered. This is a card requirement, not a function of the point of
sale equipment.
1.
Register a normal transaction.
2.
Touch the appropriate
MISC TEND
key. The message
“WORKING”
displays:
3.
At the PIN-Pad the message displays:
SALE
$2.00 – OK?
4.
Press the
GREEN
button on the PIN-Pad keypad.
5.
Insert the EMV card into the PIN-Pad. The
“WORKING”
will continue to display. If the card
will not read, the
“WORKING”
message will begin a countdown until the message
“TRANSACTION NOT COMPLETE”
displays on the register and on the PIN-Pad.
6.
Touch
CLOSE
on the ECR message box. The message
“TRY MANUAL ENTRY”
now
displays.
7.
Touch
YES
on the ECR message box. At the PIN-Pad, the SALE and transaction amount
message displays again.
8.
Press the
GREEN
button on the PIN-Pad keypad.
9.
The message
“ACCOUNT NUMBER”
displays. Enter the card number and press the
GREEN
button on the PIN-Pad keypad.
10.
The message
“ENTER EXPIRY, DATE MM/YY”
displays. Enter the 4-digit card expiration
date in MMYY format and press the
GREEN
button on the PIN-Pad keypad.
11.
The message
“ENTER CVV”
displays. Enter the CVV / CID (card verification value as shown
on the reverse of the card) and press the
GREEN
button on the PIN-Pad keypad.
12.
The message
“ZIP CODE”
displays. Enter the 5-digit zip code of the card holder and press the
GREEN
button on the PIN-Pad keypad.
13.
The message
“CHIP CARD YES=OK?”
displays. If the card is a chip card, press the
GREEN
button on the PIN-Pad keypad; if the card is not a chip card, press the RED button.
14.
When verification is complete, the PIN-Pad displays
“APPROVED”
and the draft is printed at
the ECR.
