R5
SUPREME - Navigation System
CONFIGURATION
7000 118-383, P11A1
Page 96
SBAS
This view is accessed by pressing
Main Menu
Maintenance
Configuration
GNSS/DGNSS
SBAS
Parameter Name
Description
PRN Search Mode
Change between Automatic or Manual search mode.
In Manual search mode, the R5 Navigation sensor will
try to acquire signals from satellites with id (PRN)
numbers input by the parameters PRN 1 and PRN 2 in
the view. If only one particular satellite is to be tracked,
input same number for both parameters.
In Automatic search mode, the R5 Navigation Sensor
will try to identify and track SBAS signals without user
control of satellite selection.
PRN 1 (Primary)
The PRN of the primary satellite that should be used
when operating in Manual PRN Search Mode.
PRN 2 (Secondary)
The PRN of the secondary satellite that should be
used when operating in Manual PRN Search Mode.
PRN 3
The PRN of the third satellite that should be used when
operating in Manual PRN Search Mode.
Beacon
This view is only available when using a R5 DGPS/DGNSS Navigation Sensor. It is accessed
by pressing
Main Menu
Maintenance
Configuration
GNSS/DGNSS
Beacon
Parameter Name
Description
Tuning Mode
The Tuning Mode parameter sets the frequency
selection mode of the R5 DGNSS Navigation Sensor
internal radio beacon receiver. The mode can be
Frequency Scan, Manual or Database (Auto).
In Frequency Scan mode, the beacon receiver will
search available frequencies and tune to the strongest
beacon signal. In this mode, the Navigation Sensor
continuously performs background search to discover
higher quality differential signals. While performing
background
searches,
the
navigation
Sensor
continues to receive differential corrections from the
current radio beacon station.
In Manual tuning mode, the Navigation Sensor tunes
to the specified beacon frequency for receiving
DGNSS signals.
