R5
SUPREME - Navigation System MkII
START UP
7000 118-383, B1
Page 40
Select CDU Master (Slave Mode Only)
If the R5 SUPREME CDU is configured to be used as a slave display to an existing R5
SUPREME Navigation system, the master CDU must be selected on the LWE network in
order to receive GNSS data and synchronize waypoints, routes and configurations.
Make sure that the master R5 SUPREME Navigation System is powered on and is connected
to the LWE network. On the slave display, press the button “Refresh List” in the
Select CDU
Master
view to search for R5 SUPREME CDU units on the LWE network. Select the R5
SUPREME CDU that shall provide GNSS data to the slave unit and press “Next”.
Note:
The master R5 SUPREME CDU must also be configured to provide GNSS data on the
LWE network and the slave unit must be selected in the master R5 SUPREME CDU’s
Redundant Nav
view in order to synchronize the databases between slave and master unit.
For a more detailed description how to connect and configure multi display and redundant
systems, see chapter 11.
Figure 19
– Select CDU Master
Connection View
This view is shown while the R5 SUPREME CDU connects to external equipment and
initializes the system. When the initialization is complete the R5 SUPREME CDU will
automatically switch to the
Position
view when configured as a Navigation System.
Figure 20
– Connection View
