R5
SUPREME - Navigation System MkII
START UP
7000 118-383, B1
Page 38
7
START UP
When the physical and electrical installation of the system is complete, the R5 SUPREME
Navigation System needs to be configured. This chapter describes what the installer is required
to do before the R5 SUPREME Navigation System is ready to operate.
7.1
Configuration Wizard
The first time the R5 SUPREME CDU is started, a configuration wizard will be shown. This
wizard is a helpful guide to configure the basic functionality of the R5 SUPREME System.
The following sections describe the different steps in the configuration wizard.
System Setup
The R5 SUPREME CDU can be used in a standalone AIS system, standalone Navigation
system, Combined AIS and Navigation system or be used as a slave display to an existing
R5 Navigation System. The Navigation system can be configured into two different types,
either GNSS or DGNSS, and is compatible with both the R5- and the R4 Navigation sensor.
It is up to the user to specify which equipment is connected to the R5 SUPREME CDU.
Control check which sort of sensor you have before selecting system type!
Navigation System (DGNSS) requires either R4 DGNSS Navigation Sensor (7000 109-180)
or R5 DGNSS Navigation Sensor (7000 118-771)
Navigation System (GNSS) requires either R4 GNSS Navigation Sensor (7000 109-181) or
R5 GNSS Navigation Sensor (7000 118-770)
Figure 16
– System Setup
