R5
SUPREME - Navigation System
MAINTENANCE
7000 118-383, P11A1
Page 124
back to the previous folder, use the touch interface or the arrow keypad to press the
“Up” button in upper right corner of the view.
4. Select an existing Sensor configuration file to overwrite it or enter a new file name by
pressing the “File Name” edit field.
5.
Press “Save“ to save the Sensor configuration to the specified file and directory.
6. A popup will appear stating how many parameters that have been saved in the file on
the USB memory.
Figure 120
– Sensor Config successfully saved
Alternatively can the configuration settings be saved from the R5 Navigation
Sensor’s web
interface, see section 9.4.1.
Load Sensor configuration to USB memory
Do the following to load the Sensor configuration from an existing config file on a USB
memory:
1. Insert the USB memory in the USB host interface port in the R5 CDU.
2. Enter the
Load Sensor Config from USB
view.
Figure 121
– Load Sensor Config from USB
3. Select the desired configuration file.
Use the touch interface or the arrow keypad to navigate between folders and files on
the USB memory. Only folders and Sensor configuration files will be listed in the view.
