R5
SUPREME - Navigation System
SLAVE DISPLAYS AND REDUNDANT SYSTEMS
7000 118-383, P11A1
Page 114
5. Make sure that the R5 SUPREME CDU slave has a configured IP Address and a unique
LWE Id.
Figure 104
– Slave, Network Configuration
6. The R5 SUPREME CDU slave must now select the master R5 SUPREME CDU in the
Select CDU Master
view. Select the
master and press “Next”.
Figure 105
– Select CDU Master
7. R5 SUPREME CDU master must now also find all slaves on the LWE network in order
to synchronize configuration, waypoints, active route and route lists with slaves. This is
done in the
Redundant Nav Config
view accessed from
Main Menu
Maintenance
Configuration
Interface
Network
Redundant Nav
.
Figure 106
– Master, Redundant Nav Config
