R5
SUPREME - Navigation System
OPERATION FUNCTIONALLITIES
7000 118-383, P11A1
Page 81
(Freq) Mode:
The frequency tuning mode which can be
Manual
,
Auto
or
Database
.
Bitrate
Beacon receiver bit rate.
(Bitrate) Mode:
Beacon receiver bit rate selection mode:
Manual
or
Auto.
Signal:
Signal strength of the received beacon signal.
SNR:
Signal to noise ratio. All values above 15 are good SNRs for the
beacon signal.
WER:
Word error rate, percentage of bad data words in the last 25
words received.
Health:
Health indication received from the tuned beacon station.
Firmware:
Firmware version for the internal beacon receiver.
Throughput:
Message throughput.
Beacon Database
The
Beacon Database
view is used for inspection of the radio beacon station database stored
in the R5 DGNSS Navigation Sensor. The
Beacon Database
view is accessed from
Main
Menu
Status
Navigation
GNSS / DGNSS
Beacon
Beacon Database
and
is only available when using the DGNSS version of the R5 Navigation Sensor.
Figure 81
– Beacon Station Database
The beacon station list can be sorted by ID, Name, Frequency or Range by pressing the
column headers in the view. The currently used beacon station is marked with green colour
text in the list. Each beacon station is also marked with an operational status icon:
- Green icon, beacon station is operational
- Yellow icon, beacon station operational status is unknown
- Red icon, beacon station is NOT operational, do not use.
To view more information about a beacon station, select the station in the list and press
“Extended Info”. The
Extended Beacon Info
view will be shown. In this view it also possible to
manually lock on the selected station by pressing the button “Lock on Station”. Navigation
