R5
SUPREME - Navigation System
CONFIGURATION
7000 118-383, P11A1
Page 108
Redundant Nav
Turning “on” this parameter will activate the R5
SUPREME Navigation System’s redundancy mode,
which will require an additional setup of the R5
SUPREME Navigation System.
Heading Input Port
This view is accessed by pressing
Main
Maintenance
Configuration
Interface
Input
Heading Input
Port
Parameter Name
Description
Input Port
Specifies the input port that should be used for heading
sensor data. Can be set to Input Port 1
5 or
“Auto”.
Depth Data Port
This view is accessed by pressing
Main
Maintenance
Configuration
Interface
Input
Depth Data Port
Parameter Name
Description
Input Port
Specifies the input port that should be used for depth
sensor data. Can be set to Input Port 1
5
or
“Any”.
Depth sensor data received on a port that does not
correspond to this setting will be ignored.
Input Sentence
This parameter makes it possible to only use a specific
NMEA sentence for depth data.
Input Talker ID
This parameter makes it possible to only use
sentences from a specific talker (having a specific
NMEA talker ID) for the depth data.
Use NMEA Offset
If yes, any depth offset information available in the
DPT sentence is added to the depth value taken from
this sentence.
Use Manual Offset
If yes, the manually specified offset is added to the
reported depth (regardless from which sentence it is
taken).
Manual Offset
Specifies the size of the manual offset for depth.
Manual Offset Sign
Specifies the sign of the manual offset. If positive, the
manual offset is added to the reported depth. If
negative, the manual offset is subtracted from the
reported depth.
