R5
SUPREME - Navigation System
CONFIGURATION
7000 118-383, P11A1
Page 101
There is no default sensor password in the R5
Navigation Sensor. No password set, no password
required.
Restore Password Key
It is possible to restore the
Navigation Sensor’s
password with a secret restore key.
To obtain the restore key, contact TransponderTech
Support and be prepared to provide the serial number
of the unit.
Visual Settings
Press the OPT button for 5 seconds to reset the visual settings to default values.
To quickly turn off all backlight on the R5 SUPREME CDU, press once on the
PWR
button
on the front of the CDU. This will completely turn off all backlight for the LCD; LEDs and
buttons on the R5 SUPREME CDU. However, if there is an active, unacknowledged alarm in
the system, the STATUS LED will still be visible and blink with a red light. To return to
previous light settings, press the
PWR
button again.
It is also possible to quickly change between day/night modes by pressing and holding down
the
PWR
button for 2 seconds. This will enable the
PWR
button options menu, press “Night
Mode” or “Day Mode” button to switch mode.
Figure 98
– Power Down Menu
The backlight master dimmer is quickly accessible by clicking on
Dim Backlight
in the
Power Down Menu
, which makes it easier and faster to making adjustments on the LCD’s
illumination level.
Figure 99
– Dim Backlight, Master Level
