![background image](http://html1.mh-extra.com/html/rti/vortex-850r-series/vortex-850r-series_user-manual_1497668038.webp)
38
Figure 48
Installing the Printhead (7)
Slowly close the printhead latch. The fluidic couplings should advance and seal to the
printhead cartridge.
Figure 49
Installing the Printhead (8)
Close the printhead latch. When the printhead latch is closed, the printer will prime,
clean and cap the printhead automatically. This operation will generally take a
minute or two, and will be obvious from sounds emanating from the printer.
NOTE:
The Printer may take up to 12 minutes to set itself up during initial startup. This is
normal. The machine will emit a number of chirps, whirrs and other noises as it circulates
ink and runs systems.