RTI Vortex 850R Series, User Manual, Page: 36 / 138

36

Remove the printhead cartridge from the foil bag.

Remove the orange protective plastic cover from the printhead cartridge.

Holding the printhead cartridge by the handle

Release the flaps covering the ink ports (1 and 2).

Release the clip retaining the cover near the center of the printhead cartridge
(3).

Carefully remove the protective cover (4).
Figure 44
Installing the Printhead (4)

Remove the protective strip from the electrical contacts. While holding the printhead
cartridge by the handle with one hand, grasp the pull tab with the other hand and,
slowly and carefully, peel back the plastic strip covering the electrical contacts.
Figure 45
Installing the Printhead

Dispose of the removed strip immediately and do not allow the removed strip to
contact the electrical contacts.

Remove the protective strip from the printhead nozzles. While holding the printhead