RTI Vortex 850R Series Page 124 User Manual Download

Page: 124 / 138

124

Printhead Cartridge Cleaning (Remove Cartridge)

Preparation



Lightly dampen a lint-free cloth with DI water.



Set the wipe on a clean surface.



Lightly moisten the cloth strip in a PH shipping cap with a small amount of DI water
and set aside.

Figure 158

Moisten PH Cap

Perform the following steps to ensure proper printhead cartridge cleaning:



Connect a USB keyboard to the printer, then go to Start/Run on the Embedded PCand
run CMD.



Type in the following command: usbcmd –c ph_release.
This command will de-prime the system. During de-priming, the printhead latch will
release. Listen for the latch to click and observe that it is “popped up” when release
is successful.

Figure 159

Released PH Latch

Summary of Contents for Vortex 850R Series











































































































































Search results

Summary of Contents for Vortex 850R Series

Reviews:

Related manuals for Vortex 850R Series

Brands by name

Popular brands

RTI Vortex 850R Series, User Manual

Search results

Summary of Contents for Vortex 850R Series

Reviews:

Related manuals for Vortex 850R Series

Brands by name

Popular brands