98
Figure 122
Picture of the opened clamshell
Dampen a lint-free cloth with distilled water.
Wipe the system components and paper path surfaces (uppen and lower), with a
clean, damp lint-free cloth, to remove ink overspray (aerosol) and debris.
NOTE:
Do not wipe the starwheels as they may release and fall out. Do not clean the
printhead nozzle plate at this time; it will be cleaned during another task.
5. Use a clean, dry lint-free cloth dry the inside of the unit. Avoid the grit rollers since
they can snag on the cloth and create debris.
Figure 123
Wipe Lower Surfaces
PLATEN
HOUSING
GRIT
ROLLERS