![background image](http://html1.mh-extra.com/html/rti/vortex-850r-series/vortex-850r-series_user-manual_1497668028.webp)
28
Maintenance Module (MM)
In case your printer is shipped with a MM as a separate unit, before switching on the
printer, you need to install the MM (After module has passed inspection).
Figure 31
Service Station (aka Maintenance Module)
The Service Station cleans the Printhead Cartridge of excess ink and debris, keeps the
Printhead hydrated and protected when not in use, captures ink used to keep nozzles
clear, and acts as a base to support media during printing.
Installation steps
Unpack the Maintenance Module
Check that each part of the station is complete and functional
Open the printer and the ink tank cover
Open the print engine clamshell
Locate the MM ribbon cable
Connect the ribbon cable to the MM connector at the back of the service station
Insert the station into the print engine