![background image](http://html1.mh-extra.com/html/rti/vortex-850r-series/vortex-850r-series_user-manual_1497668075.webp)
75
Adjustments
Figure 90
Adjustment Settings
The table below shows the adjustment setting possibilities:
NOTE
: The values are set in microns. 1000 micron = 1 millimeter.
Start of Job cut
Figure 91
Start of Job Cut
If the Start of Job Cut checkbox is checked the printer executes a cut before starting a
new job, which ensures the top edge of the paper to be straight.
Batch Mode
Figure 92
Batch Mode
If batch mode is enabled the printer will wait for the specified timeout before starting
to print. All the jobs arriving during the timeout will be combined into a single job. Every
new job arriving during the timeout will reset the timer to its set value! This feature only
works with jobs arriving from the network!
Adjustment
TOF – Top of Form
BOF – Bottom of Form
Cutter