![background image](http://html1.mh-extra.com/html/rti/vortex-850r-series/vortex-850r-series_user-manual_1497668035.webp)
35
Remove the fluidic cap protectors from the two fluidic couplings.
Figure 41
Installing the Printhead (2)
Open the end of the printhead package outer box and slide out the foil bag.
Figure 42
Installing the Printhead (3)
Inspect the integrity of the foil vacuum sealing. The foil bag should be formed tightly
to the contours of the printhead cartridge as shown above. If the foil is loose to any
degree then the seal has been compromised.
If a poor seal is suspected, DO NOT USE the printhead cartridge. Report the issue to
your supplier.
Carefully rip the foil packaging open at the notch. Use scissors if your foil bag does not
have a notch or you are finding it difficult to tear the bag.
Figure 43
Installing the Printhead (4)