115
Remove the paper dust from underneath the maintenance module, during the annual
cleaning. Use a vacuum cleaner for the interior of the unit, if necessary.
Figure 143
Using a Vacuum cleaner to remove debris from under the MM
Wiper cleaning
Wiper cleaning usually means that the oparator has to change the microfiber roller as it
comes to the end of its lifetime. The operator can easily recognize this stage. First of all
the shape of the roller turns from rounded to ellipse. Secondly this chage within the shape
will cause significant noises during maintenance.
NOTE:
Lifetime of the wiper roller depends on the usage, but should be change at least
twice a year.
Disconnect the wiper motor connector PCB from the mounting clip.
Figure 144
Disconnecting wiper PCB from Wiper Housing
