RTI Vortex 850R Series Page 104 User Manual Download

Page: 104 / 138

104

Wiper Inspection



Pinch the clamshell latches to release and opened the clamshell.

NOTE

: The wiper is automatically in the up position when the clamshell is open.



Go to Liberty and click on ‘Eject Service Station’ button.



Inspect the wiper to ensure that it is spins freely with no excessive noise



Check the surface of the microfiber roller (MFR) for any irregularities (bumps, divots,
etc.) or delamination (peeling of the wiper surface at the seam). If irregularities are
seen, escalate to a technician for replacement.



Use tweezers to remove any large clumps of debris.

Monthly Maintenance Tasks



Aerosol and debris removal



Paper path optical sensor cleaning



Wiper inspection



Waste ink absorber inspection



Ink tubing inspection



Lift motor gear inspection



Paper path grit roller inspection

Aerosol and debris removal; Paper path optical sensor cleaning; Wiper inspection – see
at bi-weekly maintenance tasks.

Summary of Contents for Vortex 850R Series











































































































































Search results

Summary of Contents for Vortex 850R Series

Reviews:

Related manuals for Vortex 850R Series

Brands by name

Popular brands

RTI Vortex 850R Series, User Manual

Search results

Summary of Contents for Vortex 850R Series

Reviews:

Related manuals for Vortex 850R Series

Brands by name

Popular brands