132
. Slowly close the printhead latch. The fluidic couplings will advance and seal to the
printhead cartridge.
Close the printhead latch. When the printhead latch is closed, the printer will prime,
clean and cap the printhead automatically. This operation will generally take a minute
or two, and will be apparent from sounds emanating from the print engine.
When the system is primed, print a test printjob from Liberty to make sure the cleaning
process was right and the printhead is working properly.
Waste Ink Absorber Replacement
The waste ink absorber was designed to last the life of the printer under normal printing
conditions, taking into account evaporation. Replace the waste ink absorber when ink is
leaking out of the waste ink tray.
Use fingers to squeeze the waste ink tray latches inwards, at the front of the unit, to
release and slide the tray out.
Figure 176
Waste Ink Tray Latches
If the printhead will not rotate into position, do not force
WASTE INK
TRAY LATCHES