![background image](http://html1.mh-extra.com/html/rti/vortex-850r-series/vortex-850r-series_user-manual_1497668037.webp)
37
cartridge by the handle with one hand, grasp the pull tab with the other hand and
slowly and carefully peel back the plastic strip covering the printhead nozzles.
Maintain an angle of no less than 45° with the printhead surface when pulling on the
strip.
Figure 46
Installing the Printhead (5)
Dispose of the removed strip immediately and do not allow the removed strip to
contact the electrical contacts or the printhead nozzles.
Raise the printhead latch fully until it is upright so you can insert the printhead into
the printer at an angle.
Figure 47
Installing the Printhead (6)
When the printhead cartridge is fully inserted into the printer rotate it to a vertical
position as shown.