Ross Synergy 100, Installation Manual, Page: 181 / 246

Synergy 100 Installation Guide (v16.10-S100) Completing Setup • 9–11
3. Press
0. Recall
to display the Recall Menu .
Recall Menu
4. If you wish to recall all categories of registers from the storage device, press 0. Recall .
This action reads four or five files from the storage device in succession, depending on
whether or not you have the
Squeeze & Tease WARP option installed:
• Memory Registers are recalled from the file MEMORYS.SYN .
• S&T3D Memories (if the Squeeze & Tease WARP option is installed) are recalled
from the file ST3DMEM.SYN .
• Personality Registers are recalled from the file PERS.SYN .
• Installation Registers are recalled from the file INSTALL.SYN
• 3D Wipes Registers are recalled from the file ST3DSEQ.SYN .
5. If you wish to recall only the file that pertains to a specific portion of the setup, proceed
as follows:
• Press 1. Recall Memories to recall Memory Registers . Registers are loaded
from the file MEMORYS.SYN . If you have the Squeeze & Tease WARP option
installed, your 3D memories will also be recalled from the file ST3DMEM.SYN .
• Press 2. Recall Personality to recall Personality Registers . Registers are loaded
from the file PERS.SYN .
• Press 3. Recall Installation to recall Installation Registers . Registers are loaded
from the file INSTALL.SYN .
• Press 4. Recall 3D Wipes to recall 3D Wipes Registers . Registers are loaded
from the file ST3DSEQ.SYN .
Note
An asterisk in front of a heading (heading 0, 1, and 2 in the sample
menu above) indicates that files belonging to this category are present
on the storage device. Heading 0,
Recall All
, will have an asterisk
preceding it if files belonging to any (except
Indiv 3D Wipe )
of the
categories are present. Note that this feature does not apply to heading
5,
Recall Indiv 3D Wipe
.
Note
If the switcher’s installation settings were locked during hardware
installation, you will not be able to recall the
Installation Registers .
Refer to the section “ Jumpers and Switches ” on page 2-20 for details.
Recall
0. Recall All
1. Recall Memories
MENU
Exit
100
Previous
10
Down
1
Up
SEL
Accept
2. Recall Personality
3. Recall Installation
4. Recall 3D Wipes
5. Recall Indiv 3D Wipe
*
*
*